Hydraulic Access Platforms

In India we are the market leaders in this product segment by virtue of the largest number of installations and the widest range of designs upto 42m working height.

Telescopic
Access Platforms

11 m working height Hydraulic Telescopic:

SCOPE & DESIGN CONCEPT

  • Chassis to be of small size so as to enter into narrow lanes and confined spaces.
  • The stowed height of the equipment should not exceed the chassis cabin height, so that the equipment does not foul with overhead wires and other overhead obstructions.
  • The rear overhang of the built up equipment should not exceed 50% of chassis wheel base to conform to RTA rules and also to make the unit as compact as possible.
  • The cage should rest on chassis deck to facilitate easy and quick entry at start up.
  • The cage should be automatically level in all positions with an additional hydraulic control at cage to adjust the cage level directly by the operator, if felt necessary.

Click on download for more details….

Telescopic Hydraulic Access Platforms
13.5 m working height Hydraulic Telescopic:

Sailent Features

  • ‘Zero elbow’ – No knuckle beyond stabilizers.
  • 4 – Point stabilizers for stability.
  • Lock valves on all cylinders.
  • Hydraulic levelling of cage.
  • Finger touch controls.
  • Emergency lowering valve.
  • Emergency hand pump.
  • Longer outreach.
  • Easy positioning of cage.
  • No un-safe areas so no cut-off safeties to bother about.

Click On Download For More Details….

Telescopic Access Platform
15M Working Height Hydraulic Telescopic:

SCOPE & DESIGN CONCEPT

  • Ease of operation by virtue of telescopic boom, with inching capability, which enables operator to zoom-out to point to be accessed.
  • Long reach as compared to articulated platforms.
  • Compact stowed length, makes the traveling length compact and the unit more maneuverable.
  • Easy entry/exit into/from cage, which rests on chassis deck during transportation.
  • Hydraulic cage leveling with additional cage level control in cage/basket.
  • 4-point outriggers for stabilizing vehicle with optional single push-button outrigger auto-levelling system .

Click On Download For More Details….

Telescopic Hydraulic Access Platform Manufacturer

Telescopic cum Articulated
zero elbow Access Platforms

Scope

  • Ease of operation by virtue of telescopic boom, with inching capability, which enables operator to zoom-out to point to be accessed.
  • Long reach as compared to articulated platforms.
  • Compact stowed length, reduces traveling length making the unit more maneuverable.
  • Easy entry/exit into/from cage, which rests on chassis deck during transportation.
  • Hydraulic cage leveling with additional cage level control in cage/basket.
  • 4-point outriggers for stabilizing vehicle with optional single push-button outrigger autolevelling system.
Telescopic cum Articulated zero elbow Hydraulic Access Platforms
LMTAHP165 16.5 M WORKING HEIGHT
Telescopic cum Articulated zero elbow Hydraulic Access Platforms Manufacturers
LMTHP195 19.5 M WORKING HEIGHT
Telescopic cum Articulated zero elbow Access Platforms
LMTHP25 25 M WORKING HEIGHT
LMTAHP205 20.5 M WORKING HEIGHT
LMTHP32 32 M WORKING HEIGHT

Articulated 2-Boom
Access Platforms

11 m working height:

Scope

  • Sturdy design
  • Dual mechanical parallelogram linkage to keep cage level
  • Safety belt anchorage points at cage
  • Fibre glass cage tested for insulation to 600 volts
  • Load holding valves on all cylinders
  • Optional 4-point outriggers for stabilizing vehicle with optional single push-button outrigger auto-levelling system. Standard is 2-outriggers.

Click On Download For More Details….

Articulated 2-Boom Access Platforms
13 m working height:

Sailent Features

  • Strong & sturdy box section booms
  • 360 degree continuous slewing on either side.
  • A-frame or out & down type stabilizers.
  • Precision honed cylinder tubes.
  • Hard Chrome plated piston rods.
  • Cage levelling to keep cage horizontal.
  • Insulated or steel working cage.
  • Booms control at base as well as in the cage

Click On Download For More Details….

Articulated 2-Boom Access Hydraulic Platforms
15 m working height:

Scope

  • Robust design.
  • Controls at cage and base (outrigger controls at rear of vehicle).
  • Cage levelling through dual mechanical parallelogram linkage.
  • Boom to stabilizer interlocks and vice-versa.
  • Automatic stops to prevent platform from instability.
  • Automatic overload cut off.
  • Safety belt anchorage points at cage .

Click On Download For More Details….

Compact Z-Boom
Access Platforms

11M / 15M Working Height Hydraulic Telescopic:

Scope & Design Concept

  • Chassis to be of small size so as to enter into narrow lanes and confined spaces.
  • The stowed height of the equipment should not exceed the chassis cabin height, so that the equipment does not foul with overhead wires and other overhead obstructions.
  • The rear overhang of the built up equipment should not exceed 50% of chassis wheel base to conform to RTA rules and also to make the unit as compact as possible.
  • The cage should rest on chassis deck to facilitate easy and quick entry at start up.
  • The cage should be automatically level in all positions with an additional hydraulic control at cage to adjust the cage level directly by the operator, if felt necessary.

Click On Download For More Details….

Compact Z-Boom Access Hydraulic Platforms